English
العربية
Rode M1 Handheld Cardioid Dynamic Microphone
- Cardioid Polar Pattern
- High-Output Neodymium Dynamic Capsule
- 75 Hz to 18 kHz Frequency Response
- Low Handling Noise
- High Immunity to Feedback
- Balanced, Low-Impedance Output
- Gold-Plated XLR 3-Pin Connector
- Heavy-Duty Metal Body
- Includes Mic Clip & Padded Zip Pouch
The Rode M1 is a handheld cardioid dynamic microphone designed for reliable reproduction of vocals, speech, guitars, and drums in concert venues, houses of worship, and live stage applications. Its dynamic element utilizes a neodymium magnet for high output without excessive preamp gain and delivers a frequency response of 75 Hz to 18 kHz. The resulting tone is smooth and defined with a mild bump at 200 Hz and a gentle rise from 4 to 10 kHz.
Featuring a warm response that is incredibly defined for a dynamic microphone, the M1’s smooth character and defined clarity offer incredible performance as a live vocal microphone. A tightly controlled cardioid polar pattern minimises spill and feedback.
Renowned as one of the industry’s best live vocal microphones, the M1 is an equally strong performer on guitar amplifiers as well as kick drum, snare drum, toms and percussion.
.
Key Features
- High-Output Neodymium Dynamic Capsule
- 75 Hz to 18 kHz Frequency Response
- Low Handling Noise
Acoustic Principle Dynamic Polar Pattern 
Address Type End Frequency Range 75Hz – 18kHz Output Impedance 320Ω Sensitivity -56.0dB re 1 Volt/Pascal (1.60mV @ 94 dB SPL) /- 2 dB @ 1kHz Weight 360.00g Dimensions 171.00mmH x 51.50mmW x 51.50mmD
| Adjustable Length | |
|---|---|
| Lens Communication | |
| Autofocus Points | |
| Ball head | |
| Angle of View | |
| Approx. Battery Life | |
| Battery Type | |
| Bit Depth | |
| Bit Rate | |
| Brand Name | |
| Compatible devices | |
| Built-In Flash/Light | |
| Exposure Modes | |
| Eye Point | |
| Channels | |
| Clamping | |
| Load Capacity | |
| Internal Recording Modes | |
| Audio Recording | |
| Audio Format | |
| Brand | |
| Diversity | |
| Continuous Shooting | |
| Crop Factor | |
| Bulb/Time Mode | |
| External Recording Modes | |
| Metering Range | |
| Dimensions | |
| Display Type | |
| Colour Map | |
| Aspect Ratio | |
| Exposure Compensation | |
| Capacity | |
| Built-In ND Filter | |
| Dedicated Flash System | |
| Autofocus Sensitivity | |
| Lens Mount | |
| Battery | |
| Interval Recording | |
| Dynamic Range | |
| Audio I/O | |
| Image Sensor | |
| Image Stabilization | |
| Gamma Curve | |
| Fast-/Slow-Motion Support | |
| Gross Weight | |
| IP Streaming | |
| ISO Sensitivity | |
| Image File Format | |
| Image Sizes | |
| Follow Speed | |
| Filter Size | |
| wirless | |
| .Guide number | |
| S1/S2 transmission: | |
| .Operating temperature | |
| Cover angle: cover light of 24mm lens Recycle time | |
| Environmental Protection | |
| Frequency Range | |
| Focus Type | |
| Lens Format Coverage | |
| Media/Memory Card Slot | |
| Light | |
| Included Transmitters | |
| Inputs | |
| Material of Construction | |
| Max Operating Range | |
| Maximum Aperture | |
| Maximum Weight Recommendation | |
| Metering Method | |
| Focus Mode | |
| Inputs/Outputs | |
| Internal Filter Holder | |
| Internal Battery Capacity | |
| Gain Range | |
| Frequency Response | |
| Fixed Focus | |
| Focal Length | |
| Item Weight | |
| color | |
| time Video | |
| main material | |
| Model | |
| Model Name | |
| Monitor size | |
| Mounting Options | |
| Network I/O | |
| Slow Motion Mode | |
| Number of Pixels (Effective) | |
| Optical Design | |
| Recharge Time | |
| Other I/O | |
| Outputs | |
| Package Dimensions | |
| Package Weight | |
| Polar Pattern | |
| Power I/O | |
| Creative Effects | |
| Mobile App Compatible | |
| Sound Field | |
| Product Dimensions | |
| Size | |
| Recording Limit | |
| Resolution | |
| Rotation Range | |
| SNR | |
| Sampling Frequency | |
| Screen Size | |
| Recording Format | |
| Designed for | |
| Receiver Type | |
| Sensor Crop Modes | |
| Sensor Resolution | |
| Sensor type | |
| Shooting Modes | |
| Shutter Speed | |
| Shutter Type | |
| Sensitivity | |
| Self-Timer | |
| Sensor | |
| Number of Pixels (total) | |
| Wireless | |
| Viewfinder Type | |
| Wireless Protocol | |
| Volume Weight | |
| weight | |
| White Balance | |
| Tripod Collar | |
| White Balance Modes | |
| Wireless Frequency | |
| Video Format | |
| Minimum Focus Distance | |
| Microphone Type | |
| Advertised Dynamic Range | |
| Type | |
| Number of Axes | |
| Capture Type | |
| Built-In Microphone Type | |
| Video I/O | |
| USB/Lightning Connectivity | |
| material | |
| video quality | |
| max load | |
| maximum working height: | |
| minimum working height | |
| degree | |
| Still Image Support | |
| remote battrey | |
| tripod self-envy: | |
| wight tripod | |
| Tripod Mounting Thread | |
| extended height | |
| Wireless Technology | |
| Still Image Capture Aspect Ratio | |
| Video Output | |
| load | |
| Minimum Aperture | |
| Waterproof | |
| LED light: |
Related Products
tbody
| Brand | Marantz |
| Model Name | MPM4000U |
| Connectivity Technology | USB-C connectivity |
| Connector Type | USB |
| Special Feature | volume control, USB, with desk stand, headphone out, mute button |
| Compatible Devices | Supports Windows, MacOS, Android and iOS operating systems |
| Color | Black |
| Included Components | MPM-4000U Podcast Mic, USB-C to USB-A Cable, Tabletop Mic Stand with Mic Clip, Download Card, Quickstart Guide, Safety & Warranty Manual |
Out of stock
- For Podcasting, Voice-Overs & Music
- Works with Computers & iOS Devices
- Included Pop Filter Minimizes Plosives
- 3.5mm Headphone Jack
- Cardioid Polar Pattern for Room Noise
- Headphone Volume & Mix Control
- Broadcast Quality 48 kHz/16-Bit Audio
- Bus-Powered from Device
- Included Ring Mount & Pouch
- Included Tripod Desk Stand & Cable
Out of stock
About this item
- Designed with professional sound chipset.Hold high resolution sampling rate. Sampling rate: 192kHz/24bit!Excellent for singing, speech and Voice over.It has a wide frequency response from 30 hz to 16 khz, providing excellent sound for high-resolution audio.
- 3.5mm stereo headphone jack for zero-latency monitoring! Which allows you to monitor the microphone input in realtime. Good for home studio, Home Karaoke, Garageband, Skype, Discord, Yahoo Gaming, Singing, Chatting, Smule,
- Cardioid Polar Pattern: Cardioid polar pattern reduces pickup of sounds from the sides, improving isolation of desired sound source, which is ideal for podcasting, streaming, youtube video and recordings at home or professional studio
- It meets your use of recording interviews, singing recordings, and video conferencing.It is necessary—-For YouTubers who need to make videos, record podcasts, dubbing, video commentary, singing, etc.
- Suitable for all operating systems：For all Laptop, PC and Mobile phones. No distortion, Strong output, Low power consumption.1x Condenser Microphone,1x Foam Microphone Cover,1x English manual instruction,3.5mm XLR cable,Pop Filter.
Out of stock
- Type: Condenser
- S/N Ratio: 74dB SPL (IEC651)
- Power supply: 9V alkaline battery (5mA current)
- Output connection: 3.5mm stereo mini jack
- Size:248mm x 80mm x 98mm;Weight: 6.1 oz (171 g);Studio Quality Condenser Microphone;Integrated camera shoe mount and 3/8″ screw hole;Includes windshield;2-Stage High Pass Filter (0/80Hz)
Available on backorder
- Podcasts, Streaming, Gaming, Zoom Calls
- For Computers, USB Type-C Mobile Devices
- Cardioid Pickup Pattern
- Shock-Absorbent Magnetic Tabletop Stand
- 3.5mm Headphone Out with Volume Control
- Multicolor LED Level Meter
- 5/8″-27 Mount for Broadcast Boom Arm
Out of stock
- The Jmary Lavalier Microphone MC-R1 delivers crisp, noise-free audio for interviews, vlogging, and presentations. Its omnidirectional pickup ensures clear sound, while the compact design offers portability. Compatible with smartphones, DSLRs, and recorders.
Out of stock
Description
Includes:
– NT1A
– Shock Mount with integrated pop shield
– Premium 20 Foot Mic Cable
– Dust Cover
– Instructional DVD
The Rode pack is an anniversary microphone package that includes a professional-quality NT1-A microphone and a number of useful recording accessories.
The NT1-A is a large-diaphragm side-address condenser microphone intended for general instrument and vocal recording. The mic features a 1″ diaphragm with a gold-plated membrane, which provides a wide frequency response and exceptional signal-to-noise ratio. The cardioid polar pattern provides excellent off-axis rejection, minimizing noise caused by room ambiance, instruments, monitors, headphones, etc. The balanced, transformer-less output circuitry results in quiet, low-noise signal reproduction at high output levels. The NT1-A is powered via 48V phantom power and has a standard XLR connector.
The bundled accessory package includes a studio-grade shock mount with an integrated pop filter, a 20′ premium cable, and a dust cover. It also has a bonus DVD presented by Rode founder and president, Peter Freedman. The DVD covers a variety of tips and techniques to help you get the most out of your NT1-A.
Available on backorder
RODE NTG3 Shotgun Microphone
Out of stock
- For Singers and Presenters
- Cardioid Pattern Reduces Feedback
- Rugged Metal Housing
- Silent Mute Switch
Available on backorder
- High-quality condenser capsule that delivers warmth and presence for a clear, professional sound in all recording applications.
- Directional cardioid polar pattern, optimised to reduce room sound and focus on the subject, be it dialogue, vocals or instruments.
- In-built pop filter for reducing plosives.
- Fully compatible with our simple and powerful podcasting and streaming software, RØDE Connect
- In-built digital signal processing: noise gate, compressor, APHEX® Aural Exciter™ and Big Bottom™ (accessed via RØDE Connect)
- Integrated 360-degree swing mount for quick and easy positioning on a desktop, mic stand, or studio arm.
- Unique detachable magnetic desk stand that provides excellent isolation from knocks and bumps and is quick and easy to remove.
- Class-compliant USB output that works seamlessly with computers or tablets, no drivers or software needed – just plug in and hit record.
- Zero-latency headphone monitoring eliminates distracting echo.
- Studio-quality headphone amplifier with precision level control.
- Steel and reinforced nylon resin construction, stylish matte black finish and compact, modern design.
Out of stock
For Performers & Presenters
Clip-On Lapel Mic
Lapel Clip, Battery, Case & More
Omnidirectional for Easy Placement
Switchable -10 dB Pad to Lower Volume
Power Pack with Built-In Headphone Jack
Powered by Battery or Smartphone
Out of stock
Reviews
There are no reviews yet.