SONY ECM-M1 shotgun microphone microphoe detype shotgun

- Capture pristine audio in any shooting scenario with Sony’s ECM-M1 shotgun mic—8 beamforming modes, noise filtering, and advanced DSP in one smart unit.
The Sony ECM-M1 is a compact digital shotgun microphone that revolutionizes location sound for video creators and vloggers. It’s the world’s first shotgun mic with 8 distinct recording modes, thanks to beamforming technology and advanced digital signal processing (DSP).
From ultra-directional pickup to omnidirectional capture, you’re in full control. The supercardioid capsule and wind noise reduction ensure crystal-clear speech and ambient realism. It connects directly via the Sony Multi Interface (MI) Shoe, with no batteries or cables required.
Whether you’re on-camera, behind the lens, filming interviews, or navigating noisy environments—this mic adapts instantly.
8 Selectable Recording Modes:
- Super-directional (focused speech)
- Unidirectional (general forward pickup)
- Omnidirectional (ambient room tone)
- Front + Rear (dual-person interview)
- Rear only (operator voice)
- Front + Rear separate (dual track split)
- Stereo (natural space)
- Ultra-directional (tight speech focus)
Key Features:
- 🎙️ Beamforming mic with 8 pickup patterns
- 🔇 Noise-cut & low-cut filters built-in
- 📡 Digital signal via MI Shoe – no cables or batteries
- 🎧 Onboard DSP with support for 4-channel audio
- 🪶 Ultra-compact & lightweight design
- 🧩 Compatible with Sony cameras like FX3, A7 IV, ZV-E1, FX30, etc.
Ideal for content creators, YouTubers, and filmmakers who demand pro-level audio in a portable form.
| 5 | 0 | |
| 4 | 0 | |
| 3 | 0 | |
| 2 | 0 | |
| 1 | 0 |
Related Products
Out of stock
Out of stock
- Compact Microphone Isolation Solution
- Absorbs Unwanted Room Noise & Reflections
- 5-Panel Perforated Aluminum Screen
- Adjust Side Panels for Varied Isolation
- High Density Pyramidal Acoustic Foam
- Mounts to Straight or Boom Mic Stands
- Adapters Fit 5/8″ Mic Clip/Shockmounts
- Fully Adjustable for Ideal Mic Placement
- Includes all Mounting Hardware
Out of stock
RODE NTG3 Shotgun Microphone
Resistant to Moisture and Adverse Conditions:
- RF Bias Technology: Ensures almost complete resistance to moisture, allowing reliable audio capture in humid or wet environments.
- Weatherproof Design: Comes with an aluminum storage cylinder for protection during travel.
Out of stock
- For Journalists, Vloggers, YouTubers
- 2 x Omni Lav Mics & Built-In Omni Mics
- 2 x Ultracompact Clip-On Transmitters
- Ultracompact Dual-Channel Receiver
- Connects to 3.5mm Input on Camera
- Easy to Use, Plug & Play Operation
- Adjustable Gain via Simple Buttons
- USB-Rechargeable 5-Hour Batteries
- 3.5mm Cables for Camera & Mobile Device
- 18 Systems at Once Max, up to 164′ Range
Out of stock
RODE PSA1 studio ARM</p>
- le=”list-style-type: none;”>
- ata-v-4f92f24a=””><li data-v-4f92f24a=””
>Profe
- ssiona
l s
- tudio arm
- Ideal for radio, broadcast, studio, and home use</li>
- Internal springs for quiet operation
- Includes both threaded desk insert and desk mount clamp
- a-v-4f92f24a=””>Supported microphone and shockmount/clip weight between 700g to 1.1kg</span>
Out of stock
- Lightweight 5-Section Carbon Fibre Professional Boompole
- Twist-Lock Mechanism
- Smooth Extension/Retraction System
- Precision Balanced
- Thread: 3/8”
- Length: 810-3000mm
- Weight: 535g
Available on backorder
- Max. Microphone Clip Diameter is 1.26″/32mm. 2.Microphone and Filter Shield Mask NOT Included..
- Composed of 2 pieces: (1)Scissor Arm Stand with Handheld Microphone Clip for Handheld Microphone and (1)Table Mounting Clamp..
- The scissor arm stand is made out of all steel construction, sturdy and durable.
- Folding type, convenient to carry. Stable, tough, and affordable. Can be mounted on the announcers’ table..
- The double-braced arms add strength. Your microphone is held safely on this scissor arm microphone clip.
- Metal Tubular construction
- Foldable and Lightweight convenient to carry
- 2x Microphone Mount Clips bundled in package
- 2x Microphone Adapters Bundled in Package
- Stand With 3/8″ to 5/8 ” adapter interface screw interface, clamp/grip can be screwed/changed off easily
- Allows for 3/8″ or 5/8″ accessories to be attached on stand
- 360 degree rotatable
- Non-slip rubber feet allows it stand firmly on the floor
- Rotate the plastic holder in the middle to adjust the height
- Suitable for both professionals and amateurs
- Maximum height: 142cm
- Minimum height: 86.5cm
- Boom height: 80cm
- Interface: 3/8″ screw
- Colour: Black
Out of stock
Turn your Wireless GO Transmitter into a handheld microphone with the RODE Interview GO. Once the transmitter is slotted snugly into the Wireless GO’s cradle, the adapter will give you the sound and appearance of a handheld microphone.
The Interview GO comprises an adapter and a windshield. Simply slip your Wireless GO transmitter into the adapter, and fit the windshield over the transmitter. Use this adapter in any situation where your Wireless GO would benefit from the look and easy functionality of a handheld microphone, such as on-camera interviews, walking a convention floor, and other ENG scenarios.
Out of stock
Out of stock
- Benq
- BESTON
- BOYA
- CAME-TV
- Camelion
- Canon
- Comica
- DJI
- Easy Cover
- Eirmai
- Elfakharany Digital
- Energizer
- Falcam
- FANCIER
- FB
- FeiyuTech
- FOG
- FujiFilm
- General
- Genpro
- Godox
- Gopro
- Hollyland
- Huawei
- Insta360
- IQ&T
- ITECH
- Jackar
- Jmary
- Joby
- Joop
- K&F
- Kodak
- LENSGO
- Lexar
- Lilliput
- Mamen
- Manfrotto
- Marantz
- MCOPLUS
- Meike
- Nanlite
- Neewer
- Nest
- Nikon
- Nitecore
- Olympus
- Panasonic
- Penflex
- Pisen
- PROEL
- QC
- RØDE
- Samyang
- SanDisk
- Saramonic
- Sennheiser
- Sigma
- SmallRig
- Sony
- Tamron
- TELESIN
- Tolifo
- Triopo
- Ulanzi
- Varta
- Viltrox
- Visico
- Weifeng
- Yongnuo
- Zhiyun
- Zoom






























Reviews
There are no reviews yet.