English
العربية
Mic Filter MF-10
199 EGP
– Pop Mask : 4 inch (100 mm)
– Goose Neck Length: 7.87 inch (200 mm )
– Clamp Maximum Grip: 1.85 inch (47 mm)
Are you still bothered by the obnoxious noise, thuds and pops, ruining all your efforts when you recording?
As a video streamer creator, do you wish banish the dreaded hissing and lisping sounds?
You definitely need a HyperX QuadCast Microphone Pop Filter Mask Shield
Choose YOUSHARES’s mic windscreen, take your recording and streaming to the Next Level.
Mic Pop Filter with double steel mesh compatible with HyperX QuadCast, a high density quality sponge – blocks the air out from S and P sounds perfectly, Block the Popping & Show Your Voice Heartily.
Protect your favorite mic: Protect your microphone from smell of drool, surplus spit, accumulation of saliva.
Protect mic’s stand: Flat clamp not only grasp the stand firmly, but also protect the flat stand(Comes with microphone).
Easy & quick mount / unmount: Screw rotating clamp with scratch-proof gripper and rubber mat offers you a friendly and easy mounting and demounting.
With Flexible Gooseneck, supports the pop shield head at any angle to apply different placements of your mic device.
Related Products
- Reduces Vocal Popping Sounds
- Dual-Layer 4.75″ Nylon Mesh Screen
- 7.25″ Gooseneck
- Attaches to Boom via Built-In C-Clamp
- Ball-Joint Mount for 360° Rotation
Out of stock
- Capture pristine audio in any shooting scenario with Sony’s ECM-M1 shotgun mic—8 beamforming modes, noise filtering, and advanced DSP in one smart unit.
Out of stock
- Lightweight 5-Section Carbon Fibre Professional Boompole
- Twist-Lock Mechanism
- Smooth Extension/Retraction System
- Precision Balanced
- Thread: 3/8”
- Length: 810-3000mm
- Weight: 535g
Available on backorder
Out of stock
RODE PSA1 studio ARM</p>
- le=”list-style-type: none;”>
- ata-v-4f92f24a=””><li data-v-4f92f24a=””
>Profe
- ssiona
l s
- tudio arm
- Ideal for radio, broadcast, studio, and home use</li>
- Internal springs for quiet operation
- Includes both threaded desk insert and desk mount clamp
- a-v-4f92f24a=””>Supported microphone and shockmount/clip weight between 700g to 1.1kg</span>
Out of stock
- Connects Mic to Smartphone/Tablet
- For Use with Shotgun & Wireless Mics
- For iOS and Android
- 3.5mm Male TRS to 3.5mm Male TRRS
Out of stock
- Max. Microphone Clip Diameter is 1.26″/32mm. 2.Microphone and Filter Shield Mask NOT Included..
- Composed of 2 pieces: (1)Scissor Arm Stand with Handheld Microphone Clip for Handheld Microphone and (1)Table Mounting Clamp..
- The scissor arm stand is made out of all steel construction, sturdy and durable.
- Folding type, convenient to carry. Stable, tough, and affordable. Can be mounted on the announcers’ table..
- The double-braced arms add strength. Your microphone is held safely on this scissor arm microphone clip.
- Dynamic Mic, Omnidirectional Pattern
- Shockmounted Capsule Reduces Noise
- Internal Pop Screen Reduces Plosives
- Frequency Response Optimized for Speech
- Die-Cast Aluminum Body & Matte Finish
- XLR Output
- Microphone Flag
Available on backorder
- Compact Microphone Isolation Solution
- Absorbs Unwanted Room Noise & Reflections
- 5-Panel Perforated Aluminum Screen
- Adjust Side Panels for Varied Isolation
- High Density Pyramidal Acoustic Foam
- Mounts to Straight or Boom Mic Stands
- Adapters Fit 5/8″ Mic Clip/Shockmounts
- Fully Adjustable for Ideal Mic Placement
- Includes all Mounting Hardware
Out of stock
- Metal Tubular construction
- Foldable and Lightweight convenient to carry
- 2x Microphone Mount Clips bundled in package
- 2x Microphone Adapters Bundled in Package
- Stand With 3/8″ to 5/8 ” adapter interface screw interface, clamp/grip can be screwed/changed off easily
- Allows for 3/8″ or 5/8″ accessories to be attached on stand
- 360 degree rotatable
- Non-slip rubber feet allows it stand firmly on the floor
- Rotate the plastic holder in the middle to adjust the height
- Suitable for both professionals and amateurs
- Maximum height: 142cm
- Minimum height: 86.5cm
- Boom height: 80cm
- Interface: 3/8″ screw
- Colour: Black
Turn your Wireless GO Transmitter into a handheld microphone with the RODE Interview GO. Once the transmitter is slotted snugly into the Wireless GO’s cradle, the adapter will give you the sound and appearance of a handheld microphone.
The Interview GO comprises an adapter and a windshield. Simply slip your Wireless GO transmitter into the adapter, and fit the windshield over the transmitter. Use this adapter in any situation where your Wireless GO would benefit from the look and easy functionality of a handheld microphone, such as on-camera interviews, walking a convention floor, and other ENG scenarios.
Reviews
There are no reviews yet.